UPG-07 Color Wave Series with 4 Decimal Resolution (A-Scan) From Danatronics, Inc. NDT Made Easy

UPG-07 Color Wave Series with .0001" (.001MM) Decimal Resolution AND LIVE COLOR OR MONOCHROME A-Scan

Danatronics is proud to introduce the UPG-07 series of hand-held ultrasonic thickness gages with un-precedented features and benefits.

Can your Ultrasonic Thickness Gage do this?

100K thickness datalogger with export to Excel
8 0z.
Operates on 2 AA batteries
Measures all engineering material
Store and Recall setup for use with multiple materials
All software options are field-upgradeable
Vibrate and color change on alarm

Illuminate the keypad on alarm condition
Inform the operator when to replace the transducer
Simple user-interface

We didn’t Think So.
With more than 60 years of world-wide experience in ultrasonic designs, Danatronics is pleased to introduce our newest line of portable, digital, hand-held ultrasonic thickness gages; The UPG-O7 series. The EHC series of ultrasonic thickness gages are specifically designed to non-destructively measure the wall thickness of essentially all engineering materials including: steel, aluminum, glass, ceramics, brass, copper, castings, fiberglass, plastics, rubber...

The UPG-07 is proudly made in the U.S.A.

Download the UPG-07 series Brochure
See our Article in NDT Magazine

Features of UPG-07 Series	Additional Features of UPG-07 Series
• Available in 7 models including basic, datalogging, with and without waveform in Color or Monochrome. • Up to 200 hour battery life with 2 "AA" batteries (monochrome display) • Sunlight readable • .0001" or .001mm resolution • Store and Recall setups when working with multiple materials • Small, easy to hold ergonomic custom molded, durable case with rubber keypad • Real-Time adjustment of initial gain, slope, range, rectification, zoom and blankings	• Multiple single element transducer options including contact, composite elements (high penetration), delay-line, immerision from .5-25 Mhz. • Full, two year warranty Additional Features for UPG-07 • Vibralarm (vibrates gage below/above minimum/maximum thickness value) • Illuminating keypad for easy to view go/no-go thickness values - Patent Pending • Unique, programable left-hand/right-hand operation - Patent Pending • Simple User Interface

	The UPG-07 series is ideal for a wide variety of high precision applications including thin lightbulbs.
UPG-07 is ergonomically designed to fit perfectly in your hand.
The small and powerful UPG-07 WAVE Measures .0040 or .1mm of Steel. The waveform shows clear echo separation using the UPG-07DLCW with live color waveform on .0040" of steel using a 20 Mhz, delay line contact probe. Also note the superior minimum range of .016" (.859"minus .843"') or .4mm in steel. The UPG-07 is ideal for a wide variety of applications from thin to thick thanks to its 30Mhz. bandwidth square wave pulser.


The UPG-07 Series gages can dynamically change the color of the waveform from Green to Yellow to Red to represent a good, marginal or bad part in addition to vibrate on alarm (ideal for loud environments).
Options for the UPG-07 Series with Color Display

Options for the UPG-07 Series with Monochrome Display