new !! iFlaw TM Digital Ultrasonic Flaw Detector

 

Touch the Future of digital
ultrasonic flaw detection

Danatronics proudly introduces the iFlaw TM, Digital Ultrasonic Flaw Detector with large 7" WVGA (800x480) sunlight viewable completely TOUCH SCREEN display. iFlaw TM can automatically rotate the screen from landscape to portrait formats, essentially giving you 2 flaw detectors in one small package. iFlaw TM is designed to meet the IP67 rating for harsh envionmental use in dust and moisture.

SPECIFICATIONS:

General:

 

  • Large 7" Touch Screen Display
  • Auto rotate of Landscape or Portrait modes
  • Auto light sensor for optimum contrast day or night
  • Designed to meet IP67 rating
  • 2.5 LBS
  • 8-9 hour battery operation
  • Simple, intuitive touch screen operation
  • Click and Drag Gates, Gain, Range and Delay
  • Up to 32 GB removable SD card
  • Encoder inputs for TOFD and B-Scan
  • VGA (HDMI) Output to Monitor
  • Alarm and USB outputs
  • BNC or Large Lemo Connectors
  • 30 Mhz. Square wave
  • 600 V pulser
  • Designed and made in USA

Enclosure Materialfield proven, high impact custom plastic case designed for IP67 rating and attached wrist straps for both portrait and landscape modes

Bail:  (2) for either Portrait or Landscape modes

Dimensions:  8"x6.25"x2" 

Weight:  2.5lbs or 3.0lbs (depends on one batery or two installed)

Battery:  One or two Lithium Ion Batteries

Operating Time:  8 to 10 hours with 2 batteries, 4-5 hours with one battery to lower weight to only 2.5 lbs!

 

Environmental Ratings:designed to meet IP67

Field upgradable software options: DAC/TVG, AWS, Pipe Curvature Correction, Floating Gate, Back Echo Attenuator, B-Scan, Encoded B-Scan, TOFD...

 

Download the iFlaw TM Brochure

Made In The U.S.A.  iFlaw TM is proudly made in the U.S.A.

iFlaw TM offers the largest screen to smallest overall package on the market

Portrait Mode, automatically rotates screen with built-in Gyroscope

New Software release for Feb. 2012. DAC is now available with single DAC or ASME tripple DAC including DAC arlarm on main curve, 6dB or -14dB curve with beeper or vibrate alarm. Also now standard is AWS D1, D1.5 Weld D-rating software.

iFlaw TM is simple to operate thanks to its touch screen. Operator can click and drag gate start, width and level for both gates as well as gain, range and delay. Operator can click and drag text edit box anywhere on the screen and iFlaw TM will remember where it was last positioned (typically in the top right so you can view the A-scan while viewing the live waveform)

Landscape mode typical screen shot

The text editing box can be dragged anywhere on the screen so you can easily make adjustments while viewing the live waveform. iFlaw TM even remembers where you last put the text editing box. iFlaw TM allows for 6 different screen formats - 3 in landscape and 3 in portrait - so you can easily choose a display and font size to meet your every need.

 

 

Portrait mode, split screen for maximum font size

Additional Features of iFlaw TM

TYPICAL APPLICATIONS:

  • 2 independent gates
  • click and drag gate start, width or level, gain, range and delay
  • click and drag text editing box
  • 6 display formats
  • Built in Gyroscope to automatically rotate the screen...ideal for tight areas
  • Built in vibrator to warn of alarm in loud environments
  • Built in light sensor to automatically optimize display contrast
  • Multiple screen languages available
  • Multiple software options such as DAC/TVG, floating gate, back echo attenuator, AWS code calculator, Pipe Curvature Correction, B-scan (encoder or non), TOFD capable
  • RF; Full Wave, Half +, Half - rectification modes
  • Unlimited memory, up to 32 GB removable micro SD card
  • 20 character file and id structure
  • Flexible datalogger in linear, 2D, 3D and boiler files
  • Export to Excel
  • Screen capture
  • Freeze
  • Zoom
  • 30 Mhz. Square Wave pulser
  • 600 Volt pulser for attenuating materials
  • Linear Reject
  • Auto Cal
  • Waveform storage in Datalogger
  • Auto Zoom to center echoes in middle of screen without adjusting range
  • Manual and Auto Gain
  • Main Bang and Echo Blanks
  • Weld Inspections
  • Delaminations
  • TOFD (time of flight diffration)
  • IGCSS
  • Corrosion and Thickness surveys
  • ASME, AWS  and JIS code compliance
  • Boiler Tubes
  • Pressure Vessels
  • Storage Tanks
  • Ship Hulls
  • Containers
  • Pipes
  • Steam lines
  • Compressors
  • Shafts
  • Bridge Pins
  • Bond Inspection

Additional Features of iFlaw TM

Options for

 

• light weight (2.5-3.0 lbs...depends on 1 or 2 batteries)

• 8-10 hour continuos battery life


• Easy, intuitive user interface  Small, easy to hold ergonomic custom molded,

   durable case with rubber keypad

• wide transducer selection of single, angle beam, dual, delay line and immersion



• Full, one year warranty

  • Made in USA

Additional Features of iFlaw TM

• Vibralarm (vibrates iFlaw TM on alarm) gGreat for loud environments!

• Built in Bail with multiple angles for optimal viewing


• Built in Light Sensor  

• Screen Lock



The iFlaw TM is field upgradable so you do not need to return the unit to our factory (features sold separately). The following options will be available:



• 
Floating Gate...for accurate, consistent thickness readings


•  AWS (calculates D1.1 rating automatically) Automatic


•  B-Scan and TOFD Encoder capable

 

  • Back Echo Attenuator
  • Interface Gate
  • JIS DAC
  • AVG
  • Pipe Curvature Correction


Above left: iFlaw TM setting up on typical angle beam calibration with iiw block. trig funtions of angular distance, surface distance and depth to reflector can automatically be calculated and displayed. Operator can choose which value is the largest font in the top right of display...

Above Right: iFlaw TM is simple to operate...click and drag gates, gain, delay and ragnge.

© 2004-2009 Danatronics, Inc. | Danatronics Corporation | 150 A Andover Street | Suite 8C | Danvers, Ma 01923
Phone: 978-777-0081 | Fax: 978-777-3798
http://www.danatronics.com | sales@danatronics.com