Phone: 978-777-0081
sales@danatronics.com
 

ExtendaCam

 
The ExtendaCam is a state of the art camera system with an
impressive 40x zoom ratio (10x optical, 4x digital)
 
 

Overview

   
  Features:
  • Submersible camera head, IP-67 rating - up to 1 meter
  • 40x zoom ratio (10x optical, 4x digital)
  • Variable intensity LED lighting reaching up to 25 feet
  • Pole mounted LCD monitor and recorder
  • Capture video or image stills
  • Easy to use camera control pad on pole, splashproof
  • Rugged Pole colapses to 5 feet 
  • Extend camera on telescoping pole up to 16 feet, 4 inches
  • Completely mobile system, includes shipping case
Typical Applications:
  • Bridge Structure Inspections
  • Transportation inspections
  • Security/Surveillance
  • Law Enforcement/Military
  • Mines
  • Refineries
  • Power Generation Facilities

Quickly access and inspect out-of-reach targets up to 20-feet away with the iShot Imaging XtendaCam® Manual Tilt Video Pole Inspection System. The XtendaCam® is designed specifically for viewing, illuminating, and recording inaccessible areas in a matter of minutes. The system boasts a 1/4-inch CCD zoom camera in a waterproof housing attached to a manual tilting mechanism allowing the user to change the vertical orientation of the camera in a 320-degree range. The camera system offers a crisp video output: 40 to 1 zoom ratio, auto-focus, variable shutter, gain, exposure, white balance, and backlight compensation. An LED light ring provides auxiliary lighting that reaches targets up to 25-feet away. The camera functions and lighting are controlled via a touch pad on the XtendaCam® body.

 

 

 

Models


iShot® XtendaCam® Zoom Motorized Tilt Pole Inspection System with Recorder
Components of the iShot® XtendaCam® Zoom Motorized Tilt Pole include the Motorized Tilt Camera Head (260 degrees), Telescoping Pole (Range from 5’ to 16’ 4”), and Local Control Handle with Curly Cord. (2) 3.6 Monitors, 32 GB Micro SD Card, Aux Battery Pack Charger, Battery pack kit, and Bi-Pod Kit.Please note the complete motorized tilt pole with camera head, handle and cord is part of the system and cannot be sold separately.
   
   
iShot® XtendaCam® Zoom Manual Tilt Pole Inspection System with Recorder
Components of the iShot® XtendaCam® Zoom Manual Tilt Pole include the Manual Tilt Camera Head, Telescoping Pole (Range from 5’ 9.5” to 19’), and Local Control Handle with Curly Cord. (2) 3.6 Monitors, 32 GB Micro SD Card, Aux Battery Pack Charger, Battery pack kit, and Bi-Pod Kit.Please note the complete manual tilt pole with camera head, handle and cord is part of the system and cannot be sold separately.

Specifications


Camera Specifications
Detail:
   
Image Device
1/4-type EXview HAD CCD
Signal System
NTSC
Effective Pixels
Approx. 380,000
     
Digital Zoom
4x
Optical Zoom
10x
Horizontal Viewing Angle
46 degrees (wide) to 5 degrees (tele)
     
Minumum Object Distance
10 mm (wide) to 1000 mm (tele)
Sync System
Internal
Electronic Shutter
1/1 to 1/10000 s
     
White Balance
Auto, ATW, Indoor, Outdoor, One-push, Manual
Gain
Auto/Manual (-3 to 28 dB 2 steps)
EV Compensation
-10.5 to +10.5 dB (1.5 dB steps)
     
Backlight Compensation
On/Off
Focus System
Auto (Sensitivity: normal and low), One-Push AF, Manual, Infinity, Interval AF, Zoom Trigger AF
Picture Effects
Nega Art, Black & White, Mirror Image
     
Exposure Control
Auto, Manual, Priority Mode, Bright, EV Compensation, Backlight Compensation
S/N Ratio
More that 50dB
Minimum Illumination
1.5 lux
     
Video Output
VBS: 1.0 Vp-p (sync negative), Y/C
Horizontal Resolution
470 TV Lines
Camera Control Interface
VISCA (TTL signal level), Baud rate: 9.6 Kb/s, 19.2 Kb/s, 38.4 Kb/s, Stop bit: 1 or 2 (selectable)
     
Dimensions (W x H x D)
1 9/16 x 1 13/16 x 2 5/8 inches, (39.3 x 44.8 x 65 mm)
Dimensions (W x H x D)
1 9/16 x 1 13/16 x 2 5/8 inches, (39.3 x 44.8 x 65 mm)
Weight
3.4 oz (95g)
     
Operating Temperature
32 to 122 degrees F (0 degrees C to 50 degrees C)
Storage Temperature
-4 to 140 degrees F (-20 to 60 degrees C)
Power Requirements
6 to 12 V DC
     
Power Consumption
1.6 W (motors inactive), 2.1 W (motors active)
   
     
General Specifications
Detail:
   
Pole Length
5 feet (Collapsed), 16 feet, 4 inches (Extended)
Protective Case
62" x 12" x 4.5"
 
     
Portable DVR Specifications
Detail:
   
Display
3.5" TFT LCD
Video Recording Mode
Auto / Manual / Motion / Schedule
Recording Time
65 Minutes per 1 GB for SD Card
     
Memory
30 GB HD & SD Card slot supports up to 4GB
Video Recording
720 x 480 Pixels @ 18fps
Audio Recording
Yes
     
Dual A/V Input
Both 2.5mm and 3.5mm AV Input Jacks
PC Interface
Mini USB 2.0
Power to Camera
DC 5V Output at 2.5mm AV Input Jack
     
Battery Life
3 Hours (including External CCD Power)
Photo Recording
Yes - Digital Still Capture
 

Accessories


The following accessories are available for the ExtendaCam
     
Bi-Pod Kit
The collar of the Bi-Pod Kit attaches to the XtendaCam pole underneath the camera head to allow two 8 inch legs to be attached. The rubber-footed legs provide camera head stability during XtendaCam operation.
 
     
iShot 3.6-inch LCD Monitor DVR
The small monitor/DVR allows viewing and recording live video to a Micro SD card. Monitor/DVR can be used wirelessly. Charger included.
 
     
 
Danatronics Corporation | 150 A Andover Street | Suite 8C | Danvers, Ma 01923
Phone: 978-777-0081 | Fax: 978-777-3798

http://www.danatronics.com/ | sales@danatronics.com
Login